Sterndrives.Com	Mercruiser Sterndrive Information
	Mercruiser Parts Mercruiser Help Mercruiser Manuals Mercruiser Tools Mercruiser Sterndrives Mercruiser Board Contact

Exhaust Riser Kits

Click HERE to view the Exhaust Component Look-up Chart.

These kits raise the level of the exhaust elbow to help prevent water from back-flowing
into the engine through the exhaust. Exhaust height is critical and special care must be taken
during engine installation to adhere to all factory recommendations.

Kits are sold "per engine". One kit will be enough for one engine unless you want to stack kits
for up to a maximum of 9" over normal elbow height.

Kits include all gaskets and mounting hardware. Some include accessory mounting plates if required.

You need to know what engine you have and what style of exhaust you have before ordering your kit(s).
You also need to know if your engine is raw water cooled or if it is closed (fresh water) cooled.
We no longer sell the rectangular kits for the older log-style manifolds.

93320A15 Riser Kit 3 Inch $270.00
Fits 2001-02 MCM 4.3L MPI (0M300000-0M614999)
Fits 2001-02 MCM V8 (305,350 and 377 cid) MPI engine (0M300000-0M599999)
Fits 2001-02 MIE & Ski V8 (350 and 377 cid) MPI engines (0M300000-0M316999)
Fits only the above engines with cast iron elbows
NOTE: You will also need a down-pipe extension kit if using through-prop exhaust (see pipe kits below).
NOTE: You may also need a Riser Hose Kit so your hoses reach (see hose kits below).

93320A13 Riser Kit 3 Inch $297.00
Fits MCM V6 and TBI engines with 2 piece exhaust manifolds (0M614999 and below)
Fits MCM/MIE/Ski V8 (305, 350, 377, 454 and 502 cid) engines with cast iron elbows (0M299999 and below)
Fits Mcm V8 (305 and 350 cid) carbureted engines (0M300000-0M599999) and MIE and Ski carb engines (0M300000-0M316999)
NOTE: You will also need a down-pipe extension kit if using through-prop exhaust (see pipe kits below).
NOTE: You may also need a Riser Hose Kit so your hoses reach (see hose kits below).

807476A7 Riser Kit 3 Inch $260.00
Fits 1997 and older MCM and MIE V8 engines with stainless steel exhaust elbows
NOTE: Stainless exhaust elbows should be updated to the new ceramic coated iron elbows.
Stainless exhaust elbows have been discontinued because they would not seal against the gasket properly.
Instead of purchasing this riser kit, we recommend that you buy ceramic coated iron elbows and get the proper
riser kit that fits the ceramic iron elbows.
NOTE: You will also need a down-pipe extension kit if using through-prop exhaust (see pipe kits below).
NOTE: You may also need a Riser Hose Kit so your hoses reach (see hose kits below).

93322A10 Riser Kit 6 Inch $485.00
Fits 2001-02 MCM 4.3L MPI (0M300000-0M614999)
Fits 2001-02 MCM V8 (305,350 and 377 cid) MPI engine (0M300000-0M599999)
Fits 2001-02 MIE & Ski V8 (350 and 377 cid) MPI engines (0M300000-0M316999)
Fits only the above engines with cast iron elbows
NOTE: You will also need a down-pipe extension kit if using through-prop exhaust (see pipe kits below).
NOTE: You may also need a Riser Hose Kit so your hoses reach (see hose kits below).

93322A12 Riser Kit 6 Inch $467.50
Fits MCM V6 and TBI engines with 2 piece exhaust manifolds (0M614999 and below)
Fits MCM/MIE/Ski V8 (305, 350, 377, 454 and 502 cid) engines with cast iron elbows (0M299999 and below)
Fits Mcm V8 (305 and 350 cid) carbureted engines (0M300000-0M599999) and MIE and Ski carb engines (0M300000-0M316999)
NOTE: You will also need a down-pipe extension kit if using through-prop exhaust (see pipe kits below).
NOTE: You may also need a Riser Hose Kit so your hoses reach (see hose kits below).

807477A5 Riser Kit 6 Inch $478.00
Fits 1997 and older MCM and MIE V8 engines with stainless steel exhaust elbows
NOTE: Stainless exhaust elbows should be updated to the new ceramic coated iron elbows.
Stainless exhaust elbows have been discontinued because they would not seal against the gasket properly.
Instead of purchasing this riser kit, we recommend that you buy ceramic coated iron elbows and get the proper
riser kit that fits the ceramic iron elbows.
NOTE: You will also need a down-pipe extension kit if using through-prop exhaust (see pipe kits below).
NOTE: You may also need a Riser Hose Kit so your hoses reach (see hose kits below).

Exhaust Down-Pipe Kits

These down-pipe extension kits are used for engines with through-prop exhaust.
They come extra long to work with the 6" Riser Kits and you are only using 3" Riser Kits
you will simply cut off the bottom 3" from the pipe.

14801A1 Down-Pipe Kit $385.00
Fits sterndrive engines with through-prop exhaust.
Includes port and stb angled down-pipes.
Fits MCM V8 (305, 350 and 377cid) engines (0W309999 and below)
NOTE: You may also need a Riser Hose Kit so your hoses reach (see hose kits below).

14865A1 Down-Pipe Kit $280.00
Fits sterndrive engines with through-prop exhaust.
Includes port and stb angled down-pipes.
Fits MCM V6 engines with two-piece exhaust (0W309999 and below)
NOTE: You may also need a Riser Hose Kit so your hoses reach (see hose kits below).

807963A1 Down-Pipe Kit $365.00
Fits sterndrive engines with through-prop exhaust.
Includes port and stb angled down-pipes.
Fits MCM V8 engines (454 and 502cid)
NOTE: You may also need a Riser Hose Kit so your hoses reach (see hose kits below).

Riser Water Hose Kits

32-865022A1 Hose Kit $107.00
Used with 3 inch and 6 inch exhaust risers on standard cooled engines.
Fits 2002 and newer MCM 4.3L MPI engines with 1 or 3 point drain system (0M615000 and up).

32-865024A1 Hose Kit $97.00
Used with 3 inch exhaust risers on CLOSED cooled engines.
Fits 2002 and newer MCM 4.3L MPI engines (0M615000 and up).

32-865027A1 Hose Kit $69.00
Used with 3 inch exhaust risers on standard cooled engines.
Fits 2002 and newer MCM 4.3L MPI engines with 7 point drain system(0M615000 and up).

32-865029A1 Hose Kit $48.00
Used with 3 inch exhaust risers on CLOSED cooled engines.
Fits 2002 and newer MCM V8 (305, 350 and 377cid) MPI engines (0M615000 and up) and
MIE V8 (350 and 377 cid) MPI engines (0M390000 and up)

32-865998A01 Hose Kit $108.00
Used with 6 inch exhaust risers on CLOSED cooled engines.
Fits 2004 and newer MCM 4.3L MPI engines (0W310000 and up).

32-865033A1 Hose Kit $110.00
Used with 6 inch exhaust risers on standard cooled engines.
Fits 2002 and newer MCM V8 (305, 350 and 377 cid) MPI engines with 1 or 3 point drain system (0M615000 and up).

32-865035A1 Hose Kit $106.00
Used with 6 inch exhaust risers on standard cooled engines.
Fits 2002 and newer MIE V8 (305, 350 and 377 cid) MPI engines with inline transmission (0M390000 and up).

32-865037A1 Hose Kit $106.00
Used with 6 inch exhaust risers on standard cooled engines.
Fits 2002 and newer MIE V8 (305, 350 and 377 cid) MPI engines with v-drive transmission (0M390000 and up).

32-865039A1 Hose Kit $173.20
Used with 6 inch exhaust risers on CLOSED cooled engines.
Fits 2002 and newer MCM V8 (305, 350 and 377 cid) MPI engines with v-drive transmission (0M615000 and up) and
MIE V8 (350 and 377 cid) MPI engines with inline transmissions (0M390000 and up).

32-865041A1 Hose Kit $123.42
Used with 6 inch exhaust risers on CLOSED cooled engines.
Fits 2002 and newer MIE V8 (350 and 377 cid) MPI engines with vee drive transmissions (0M390000 and up).

Mercruiser Sterndrive Parts. Pre-Alpha, R, MR and MC1 Parts Alpha One Parts Seal Kits Alpha One Gimbal (Transom) Parts and Kits Alpha Gen II Parts Alpha Gen II Gimbal (Transom) Parts and Kits Bravo One Parts Bravo Two Parts Bravo Three Parts Bravo Gimbal (Transom) Parts and Kits TR and TRS Parts Transom Seal Kits Gimbal Bearings Shift Cable Kits Gear Kits Shift Interuptor Switch Kits Anodes and Zinc Kits Water Pump Kits Power Trim Pump Kits and Trim System Parts Decal Sets Sterndrive Special Tools Mercruiser shop Manuals Propellers Remote Controls Gauges Trim Sender Switches Trim Cylinder Assemblies

Mercruiser Engine Parts Filters and Filter Kits Tuneup Kits Carburetor Rebuild Kits Carburetors Raw Water Pump Kits Circulation Water Pumps Spark Plugs Spark Plug Wire Kits Gasket Sets Exhaust Manifolds Exhaust Elbows Exhaust Riser Kits Exhaust Water Shutter Kits Ignition Modules and Ignition Coils Cooling System Parts Starter Motors Solenoids Alternators and Charging Systems Belts and Belt-Pulley Kits Drive Couplers Fuel Pumps (Mechanical and Electric) Wire Harnesses Gauges and Instruments Partial Engine Assemblies Grease, Lubricants and Adhesives

©2004 Sterndrives.Com •Email • About Us • Home • Return Policy

• Mercruiser Help • Shop Manuals • Google Mercruiser Group • Contact

Note: We are NOT Mercury Marine or Mercruiser.